Users Manual Part 5

Clinical User’s Guide IBA | 39-27|
Volume 1 - Treatment Session
|Part VI - Using adaPT deliver in Standalone Mode Resuming after a Partial Irradiation |
Figure 39-25. Resuming irradiation - Partial treatment records found
The user must choose the correct report based on the date and time of the partial
irradiation to be resumed, and click OK to continue to proceed to the Preparation
screen.
No partial records found
In case adaPTdeliver finds no record that matches the irradiation to be resumed, a
popup is displayed when the Beam Selection screen appears. There are two
possibilities:
 The system did find an unfinished irradiation, but the delivered MU did not
match: In this case, the data has not been recovered yet and the User can
proceed to an offline recovery. (See section “Offline recovery - adaPTdeliver
session crashes”)
 The system did not find any matching report: The data has not been recovered
yet and the User can proceed to a recovery based on the DCEU values. (See
section “Manual Recovery from DCEU values”)
Using an OIS
DEV-Centric mode
1. In the OIS, create a continuation fraction.
2. Then create an Appointment and proceed to Check-in the patient.