Users Manual Part 5

IBA | 39-24 |
Clinical User’s Guide
Volume 1 - Treatment Session
|Part VI
- Using adaPT
deliver
in Standalone Mode Resuming after a Partial Irradiation
|
Partial treatment record found
1. In the SESSION DEFINITION SCREEN (Figure 35-2), load the desired patient and
plan.
2. Select the beam to be resumed.
3. Search the adaPTdeliver database manually for data about partial treatments. To
do so, in the Dose panel, click on Partial (Figure 39-21).
Figure 39-21. Resuming irradiation after partial treatment in Standalone mode
4. In the popup, enter the delivered MU of the partial irradiation to be resumed, and
click Search (Figure 39-22).
5. Click RESUME to continue.