Users Manual Part 5

IBA | 39-6 | Clinical User’s Guide
Volume 1 - Treatment Session
|Part VI - Using adaPT deliver in Standalone Mode Resuming after a Partial Irradiation |
Termination by the Therapist: No Recovery
needed
When the irradiation is manually terminated by the therapist, a popup message
appears informing the user that the irradiation is not complete (Figure 39-2).
Figure 39-2. Recovery after Termination by Therapist - Warning message
adaPTdeliver builds an irradiation record and stores it in its database.
1. In the TREATMENT SCREEN, click Next.
2. On coming back to the BEAM SELECTION SCREEN, the user can chose to resume
the irradiation (immediately or at a later point of time)
 Resume in the same session: This is described in section “Resuming
Irradiation in the Same Session”.
 Resume in a new session: This is described in section “Resuming
Irradiation in a New Session”.
Specific warnings
When working in Standalone mode, the User will see specific warning pop-ups to
potentially prevent actions that might result in loss of data.