Users Manual Part 5

IBA | 37-2 | Clinical User’s Guide
Volume 1 - Treatment Session
|Part VI - Using adaPT deliver in Standalone Mode Starting Irradiation |
If you intend to perform treatment with a gated beam, pay attention to the following
warning message:
When the beam line is tuned, click Start from the Actions panel of the Treatment
Screen to allow the beam to be delivered continuously. Feedback is provided to the
Radiation Therapy Technologist (RTT) in the Treatment Control Room (TCR) to
monitor the irradiation.
Figure 37-1. Irradiation Screen: Irradiating
WARNING As a Radiation Therapy Technologist (RTT), before allowing irradiation
with a triggered treatment beam, you are recommended to check the
patient file to see that the selected gating source is the prescribed one.
WARNING To carefully monitor both the patient and the information displayed on
the screen, two Radiation Therapy Technologists (RTTs) must supervise
the treatment in the Treatment Control Room (TCR).