Users Manual Part 4

IBA | 35-22 | Clinical User’s Guide
Volume 1 - Treatment Session
|Part VI - Using adaPT deliver in Standalone Mode Preparing the Equipment for Irradiation |
Figure 35-13. PMS Interface Panel
(Completed)
Requesting Beam
On the Beam panel of the EQUIPMENT PREPARATION SCREEN you have to launch your
beam request.
As long as the colored state bar does not read Ready (indicated by the green color),
you will not be able to proceed to irradiation.
When beam is allocated and successfully prepared, be it automatically or by the MCR
operator, the colored state bar reads Ready (indicated by the green color).
Figure 35-14. Beam Panel