Users Manual Part 4

IBA | 35-2 |
Clinical User’s Guide
Volume 1 - Treatment Session
|Part VI
- Using adaPT
deliver
in Standalone Mode Preparing the Equipment for Irradiation
|
Equipment Preparation for a Setup Beam
From the EQUIPMENT PREPARATION SCREEN you have to enter the positioning
corrections and confirm the corrections to indicate that preparation has finished.
As long as the colored state bar does not read Ready (indicated by the orange color),
you will not be able to proceed to irradiation.
Figure 35-1. Equipment Preparation Screen
(Setup Beam)
The E
QUIPMENT PREPARATION SCREEN indicates the coordinate system in which the
listed positioning parameters are expressed.
Note: Parameters that are irrelevant for this treatment room are grayed out.
The listed positioning parameters are:
Gantry (°)
Snout (cm)
X (cm)
Y (cm)
Z (cm)
Rotation)
Pitch (°)