Users Manual Part 4

IBA | 34-2 | Clinical User’s Guide
Volume 1 - Treatment Session
|Part VI - Using adaPT deliver in Standalone Mode Proceeding to Beam Selection |
Proceeding With an Incomplete Plan
Whenever you want to proceed without having selected all the baselined beams of
the plan (only baselined beams are visible at this stage), a pop-up message prompts
you for confirmation.
Figure 34-1. Beam Selection Confirmation Prompt
Click OK if you want to proceed with your selection, else click Cancel.
Reporting Functions
History reports typically get created automatically at completion of the irradiation.
Each completed beam has a history report.
Selecting a Beam
From the BEAM SELECTION SCREEN you can select one or multiple beams to be
included in the current session; selected beams are indicated in bold.
When you have selected all beams to be included in the session, click Next to
actually proceed to the next treatment session step: the actual beam selection. The
B
EAM SELECTION SCREEN appears.