Users Manual Part 4

Clinical User’s Guide IBA | 33-9|
Volume 1 - Treatment Session
|Part VI - Using adaPT deliver in Standalone Mode Including One or More Beams into a Session |
 Distal Open Beam Range (g/cm
2
)
1
: the range of the proton beam farthest
away from the nozzle, without any beam modifying accessories (range
shifter, block, range compensator, etc.).
 Accessories:
 Block: identifier of the block (optionally used).
 Compensator: identifier of the range compensator (optionally used).
 Snout ID
 Ridge Filter: identifier of the ridge filter (optionally used).
 Range Shifter: identifier of the range shifter (optionally used).
Note: At least one accessory must be present.
 Patient Positioning:
 Patient Support Type: as specified in the beam; possible entries are:
 Chair
 Table
 Patient Orientation: as specified in the beam; possible entries are:
 Sitting
 HFP: Head First-Prone
 HFDR: Head First-Decubitus Right
 FFDR: Feet First-Decubitus Right
 FFP: Feet First-Prone
 HFS: Head First-Supine
 HFDL: Head First-Decubitus Left
 FFDL: Feet First-Decubitus Left
 FFS: Feet First-Supine
 Gantry angle (deg): as obtained from the prescription.
Note: The gantry angle is always defined in the IEC 61217 fixed coordinate
system.