Users Manual Part 4

Clinical User’s Guide IBA | 33-3|
Volume 1 - Treatment Session
|Part VI - Using adaPT deliver in Standalone Mode Including One or More Beams into a Session |
Selecting Some or All Beams
You can quickly specify some or all beams that belong to a plan by repeatedly double-
clicking that plan. Three quick selection options exist:
 No beam selected
 All beams selected
 All previously selected beams selected
Figure 33-1 illustrates the quick selection options at plan level. Selected beams
appear in bold.
Figure 33-1. Quick Selection Options
Displaying Information in the Information Area
To actually display information in the information area on any of the listed instances,
you have to click on that instance in the list.
Note: Clicking the arrows ( ) does not display any information.
Select a patient, study, plan, or beam and the associated data appears in the
information area.
This information area has the following tabs available:
 Patient & Plan: contains the patient, study, and plan details. For detailed
information refer to Section “Reviewing Patient, Study, and Plan Information” on
page 33-5.
some beams selected
all beams selected
all previously selected beams selected
no beam selected
First double-click
on plan
Second double-click
on plan
Third double-click
on plan
original situation