Users Manual Part 4

IBA | 33-2 | Clinical User’s Guide
Volume 1 - Treatment Session
|Part VI - Using adaPT deliver in Standalone Mode Including One or More Beams into a Session |
A beam that is not selected, i.e., a beam that is not listed in bold, cannot be displayed
on the B
EAM SELECTION SCREEN.
Any beam that you selected already to be included in the session can still be
deselected. To deselect any such beam, double-click that beam.
As you proceed with the treatment process, adaPTdeliver will successively display
treatment session steps 2 (Beam Selection), 3 (Preparation), and 4 (Treatment) for
each of the beams that you have selected for inclusion into the session in treatment
session step 1 (Session Definition).
To remove a selected beam from your selection, double-click the bold beam and the
beam is listed in plain again.