Users Manual Part 4

IBA | 30-12 |

Clinical User’s Guide

Volume 1 - Treatment Session

|Part IV

- Using

ada

prescribe

Using QA Features of adaPT

prescribe

Copying a Layer

You can copy a layer of the selected beam. In order copy a layer of the selected beam,

proceed as follows:

1. In the LAYE R DETAILS PANE, right click on the layer line that you want to copy. The

AYE R EDIT MENU appears.

2. Select the ‘Copy’ option from the LAYER EDIT MENU.

Pasting a Layer

You can paste a previously copied layer in the selected beam. In order to paste a layer

in the selected beam, proceed as follows:

1. In the LAYE R DETAILS PANE, right click on the layer line before or after which you

want to paste the previously copied layer. The L

AYE R EDIT MENU appears.

2. Select the desired option from the LAYE R EDIT MENU (either ‘Paste Before’ or

‘Paste After’).

Editing Spot Details Using the Spot Editing Menu

In the Spot Details Pane, right click on a given spot. The SPOT EDIT MENU appears:

Figure 30-8. Spot Edit Menu