Users Manual Part 4

Clinical User’s Guide IBA | 30-7|
Volume 1 - Treatment Session
|Part IV - Using ada PT prescribe Using QA Features of adaPT prescribe |
To access the layer editing screen, click the button next to the No. Layers field.
The L
AYER EDITING SCREEN appears.
Figure 30-4. Layer Editing Screen
The L
AYER EDITING SCREEN contains the following elements:
 Layer details pane: this is a list of the layers of the selected beam. For each
layer, the following information is listed:
 Index: this is automatically assigned and cannot be edited.
 Cumulative Weight: the weight of the current layer summed to the total
weight of all previous layers. This field cannot be edited.
 Energy (MeV): the energy of each layer can be edited.
 Number of paintings: the number of paintings to be performed for each
layer can be edited. For detailed information, refer to section “Repainting
Modes” on page 20-5.
At the bottom of the layer details pane, there is a Rescale layer button next to the
word ‘by’ and an editable field. You may select a layer and use the editable field to
write down the factor by which you want to multiply the weight of all the spots in the
selected layer.
Click on the Rescale layer button and the weight of all the spots in the selected layer
is scaled.
Layer details pane Spot details pane