Users Manual Part 3
Clinical User’s Guide
IBA | 29-3|
Volume 1 - Treatment Session
|Part IV
- Using
ada
PT
prescribe
Managing Beams
|
Viewing a Setup Beam
To view a setup beam, click that beam in the list of beams. The SETUP BEAM DISPLAY
SCREEN appears.
Figure 29-2. Setup Beam Display Screen
Apart from the beam description, which can always be edited, any imported setup
beam can only be viewed. A setup beam provides positioning information only.
Note: The ‘Baselined by’ field displays the name of the user who baselined the
beam.
If the tolerance table linked to the setup beam is not complete, or if there is no
tolerance table associated to the beam, the user can select a tolerance table.
Note: It is mandatory to select a tolerance table before being allowed to baseline.