Users Manual Part 3

IBA | 26-8 | Clinical User’s Guide
Volume 1 - Treatment Session
|Part IV - Using ada PT prescribe Managing Patients |
When you select a patient in Read-only mode, the patient is not locked. However, if
you select the patient in Editing mode, you lock that patient. For detailed information,
refer to section “Unlocking a Patient“ on page 26-12.
Figure 26-5. Patient Panel (typical)
From the P
ATIENT PANEL (TYPICAL) you can view essential patient details.
To vi ew t h e irradiation history of the patient, if existing, click the button next to
the patient ID. For detailed information, refer to section “Obtaining Irradiation History
Reports” on page 26-16.
From the footer area you can click any of the following buttons:
 New patient: to create a new patient.
 Import patient: to import a patient using DICOM. For detailed information, refer
to section ‘Importing a Patient Using DICOM’ on page 26-9.
 Edit patient: you can edit various elements of the patient data, depending on
the fact whether or not a beam has been defined for the patient already. For
detailed information, refer to section ‘Editing a Patient’ on page 26-9.
 Unlock patient: if the selected patient is currently locked in adaPTdeliver to
proceed to irradiation, or if the patient is being edited in adaPTprescribe, you can
unlock that patient (provided you have sufficient rights to do so in the user rights
manager). For detailed information, refer to section “Unlocking a Patient“’ on
page 26-12.
Note: Never unlock a patient that is locked during irradiation!