Users Manual Part 2

Clinical User’s Guide IBA | 14-19|
Volume 1 - Treatment Session
|Part II - Using Treatment Room Equipment Installing and Removing Accessories into/from the Accessory Drawer or PBS
Type DN_XL (Dedicated Nozzle - Extra Large)
Snout Operations
The type DN_XL snout is a rectangular snout with five slots that cater to two different
accessories:
 four block holders (slots 1.1, 1.2, 1.3, and 1.4)
 one range compensator, range shifter or ridge filter holder (slot 2)
Once installed onto the snout, each of the four blocks is retained by a safety lock; the
snout itself is secured by a pneumatically actuated safety pin.
Figure 14-8. Type DN_XL Snout Components
Block (max. 4)
slots 1.1 thru to
1.4, for blocks
slot 2
safety locks for
block slices
(4 in total)
presence
switches for
block slices
(4 in total)
snout lock
LEDs
(7 in total)
snout eID
reader
‘snout locked’
connector