Users Manual Part 2
IBA | 14-16 |
Clinical User’s Guide
Volume 1 - Treatment Session
|Part II
- Using Treatment Room Equipment Installing and Removing Accessories into/from the Accessory Drawer or PBS
The LEDs turn ON (green light) when the respective presence switches or pressure
pins send a signal indicating that (each item corresponding to a LED in the same
order as the list above):
The snout has been inserted
The first block slice has been installed into slot 1.1
The second block slice has been installed into slot 1.2
The second accessory has been installed into slot 2
The hinged retainer is closed
Three presence switches are installed at the back of the snout detect the correct
installation of the accessories. A pressure pin on the hinged retainer detects whether
or not the retainer has been closed.
Otherwise, the LEDs are OFF.
Figure 14-6. LEDs on the Snout’s Tray