Users Manual Part 2

Clinical User’s Guide IBA | 14-15|
Volume 1 - Treatment Session
|Part II - Using Treatment Room Equipment Installing and Removing Accessories into/from the Accessory Drawer or PBS
Type DN_M (Dedicated Nozzle - Medium)
Snout Operations
The type DN_M snout is a round snout with three slots:
 two block holders (slots 1.1 and 1.2)
 one range compensator, range shifter or ridge filter holder (slot 2)
One hinged retainer, including a spring-loaded retaining pin, secures the accessories
once installed onto the snout. Three safety locks retain the accessories in place even
when the hinged retainer is open.
Figure 14-5. Type DN_M Snout Components
Five LEDs are installed on the snout’s tray:
 SNOUT INSERTED
 SNOUT SLOT 1.1
 SNOUT SLOT 1.2
 SNOUT SLOT 2
 DOOR LOCKED
range
compensator
slots 1.1 & 1.2
slot 2
Hinged retainer
Spring loaded
retaining pin
safety
locks (3)
blocks (2)