Users Manual Part 2

Clinical User’s Guide IBA | 14-9|
Volume 1 - Treatment Session
|Part II - Using Treatment Room Equipment Installing and Removing Accessories into/from the Accessory Drawer or PBS
Type DN_S (Dedicated Nozzle - Small) Snout
Operations
The type DN_S snout is a round snout with two slots:
 one block holder (slot 1)
 one range compensator, range shifter or ridge filter holder (slot 2)
One hinged retainer, including a spring-loaded retaining pin, secures the accessories
once installed onto the snout. Two safety locks retain the accessories in place even
when the hinged retainer is open.
Figure 14-2. Type DN_S Snout Components
Four LEDs are installed on the snout’s tray:
 SNOUT INSERTED
 SNOUT SLOT 1
 SNOUT SLOT 2
 DOOR LOCKED
block
slot 1
slot 2
Hinged retainer
Spring loaded
retaining pin
range
compensator
safety
locks (2)