Users Manual Part 2

IBA | 11-18 | Clinical User’s Guide
Volume 1 - Treatment Session
|Part II - Using Treatment Room Equipment Using the Remote Positioning Controls |
Using Auto Mode to Move the Imaging Devices
In order to move the imaging devices, proceed as follows:
1. Click on the desired option, as follows:
2. Press and hold the MEB and Move buttons on the remote positioning hardware
console until the device reaches the target position.
Preparing Equipment for a CBCT Acquisition
When a CBCT preparation is requested using adaPTinsight, the CBCT PREPARATION
PANEL (EQUIPMENT NOT READY) of the remote positioning controls appears
automatically.
Table 11-2. Imaging Devices Movement Options
Icon Meaning
Put both imagers in position for image
acquisition.
Put the portal imager in position for image
acquisition.
Put the orthogonal imager in position for
image acquisition.
Retract all imagers.