Users Manual Part 2

IBA | 13-8 |
Clinical User’s Guide
Volume 1 - Treatment Session
|Part II
- Using Treatment Room Equipment Attaching/Removing a Patient Support Device to/from the PPS
|
Figure 13-6. Positioner Menu
Ready to Dock
4. Long touch Mode. Ready to Dock appears.
5. Press the lock/unlock button on the coupling system. The docking device is now
pneumatically locked onto the coupling system.
Note: There is a lock/unlock button on either side of the coupling system. You
can use any of these two buttons.
Note: The lock/unlock buttons on the coupling system are lit before and after
the docking/undocking procedure; the buttons are blinking during that process.
6. Visually verify that the lock/unlock button on the coupling system is lit and not
blinking.
CAUTION Movement of the Patient Positioning System (PPS) is only possible if
the coupler is properly engaged and if the docking device is locked, i.e.,
the lock/unlock button on the coupling system has been pressed.