Users Manual Part 2

Clinical User’s Guide IBA | 13-7|
Volume 1 - Treatment Session
|Part II - Using Treatment Room Equipment Attaching/Removing a Patient Support Device to/from the PPS |
Manual Docking and Undocking
Manually Docking a PPS Support Device
To manually attach a docking device to the PPS:
1. Manually move the docking device over the coupling system of the PPS.
2. Lower the docking device slowly onto the coupler housing.
3. Long touch the PPS icon on the WIRELESS HAND-PENDANT GUI SCREEN (see
Figure 8-2). The P
OSITIONER MENU appears (see Figure 13-6).
WARNING No patient must be present on the docking device while performing a
manual docking or undocking procedure.
CAUTION The Patient Positioning System (PPS) coupler and the docking device
coupler can only lock when they are properly aligned. Make sure that
both couplers are properly aligned before pressing the lock/unlock
button on the wrist.