Users Manual Part 2

Clinical User’s Guide IBA | 11-17|
Volume 1 - Treatment Session
|Part II - Using Treatment Room Equipment Using the Remote Positioning Controls |
2. Press and hold the MEB and Move buttons on the remote positioning hardware
console until the device reaches the target position.
Moving the Gantry
Figure 11-13. Gantry Options
(typical)
In order to move the gantry, proceed as follows:
1. Click on the gantry icon and the ‘⊚’ option is automatically selected.
2. Press and hold the MEB and Move buttons on the remote positioning hardware
console until the device reaches the target position.
Moving the PPS
Figure 11-14. Gantry Options
(typical)
In order to move the PPS, proceed as follows:
1. Click on the PPS icon and the ‘⊚’ option is automatically selected.
2. Press and hold the MEB and Move buttons on the remote positioning hardware
console until the device reaches the target position.