Users Manual Part 2

Clinical User’s Guide
IBA | 12-19|
Volume 1 - Treatment Session
|Part II
- Using Treatment Room Equipment Alignment Tools and Devices
|
Setting up for Acquiring Stereo X-ray Images Using
Rad-A
1. Acquire an X-ray image.
2. Move the gantry to the second angle by selecting Setup-90° or Treat-90° on the
hand-pendant.
3. Acquire the second X-ray image.
CAUTION No Digital Imaging Device (DID) flat panel must be plugged or
unplugged from the associated power supply while the power supply
is powered on. If there is a need to connect or disconnect a DID panel,
the associated power supply must be switched off first. Else the DID
panel may suffer severe damage.