Users Manual Part 2

IBA | 11-16 | Clinical User’s Guide
Volume 1 - Treatment Session
|Part II - Using Treatment Room Equipment Using the Remote Positioning Controls |
Figure 11-12. Status Panel - Accessory Drawer Position Feedback
In order to move the accessories holder, proceed as follows:
1. To move the accessory drawer in the beam path, select the ‘In’ option.
2. Press and hold the MEB and Move buttons on the remote positioning hardware
console until the device reaches the target position.
Alternatively,
1. To move the accessory drawer out of the beam path, select the ‘Out’ option.
The orange
background
indicates that
the accessory
drawer is not at
the prescribed
position.
The gray
background
indicates that
the accessory
drawer is at the
prescribed
position.