Users Manual Part 2

IBA | 11-38 | Clinical User’s Guide
Volume 1 - Treatment Session
|Part II - Using Treatment Room Equipment Using the Remote Positioning Controls |
Figure 11-41. PPS + Rot Arrow (above) and PPS - Rot Arrow (below)
2. Press and hold the MEB and Move buttons on the remote positioning hardware
console until the device reaches the target position.
Pitching the PPS
Proceed as follows:
1. Click the PPS + Pitch icon to pitch the PPS in the positive direction.
Alternatively, click the PPS - Pitch icon to pitch the PPS in the negative direction.
Figure 11-42. PPS +Pitch Icon (above) and PPS - Pitch Icon (below)
2. Press and hold the MEB and Move buttons on the remote positioning hardware
console until the device reaches the required position.
Rolling the PPS
Proceed as follows:
1. Click the PPS + Roll icon to roll the PPS in the positive direction.
Alternatively, click the PPS - Roll icon to roll the PPS in the negative direction.
horizontal
rotation axis
pitch axis