Users Manual Part 2

Clinical User’s Guide IBA | 11-37|
Volume 1 - Treatment Session
|Part II - Using Treatment Room Equipment Using the Remote Positioning Controls |
Figure 11-39. X and Y PPS Axes Icon
2. Press and hold the MEB and Move buttons on the remote positioning hardware
console until the device reaches the target position.
Moving the PPS Along the Z Axis
Proceed as follows:
1. To move the PPS in the + direction along the Z axis, click on the +Z on top of the
Z PPS Axis icon.
Alternatively, to move the PPS in the - direction along the Z axis, click on the -Z
below the Z PPS Axis icon.
Figure 11-40. Z PPS Axis Icon
2. Press and hold the MEB and Move buttons on the remote positioning hardware
console until the device reaches the target position.
Rotating the PPS Around the Isocenter
Proceed as follows:
1. Click the PPS + Horizontal Rotation icon to rotate the PPS in the positive
direction.
Alternatively, click the PPS - Horizontal Rotation icon to rotate the PPS in the
negative direction.