Users Manual Part 2

IBA | 11-36 | Clinical User’s Guide
Volume 1 - Treatment Session
|Part II - Using Treatment Room Equipment Using the Remote Positioning Controls |
Figure 11-37. PPS Commands
(typical)
Moving the PPS Along the X Axis
Proceed as follows:
1. To move the PPS in the + direction along the X axis, click on the +X on the right
of the X and Y PPS Axes icon.
Alternatively, to move the PPS in the - direction along the X axis, click on the -X
on the left of the X and Y PPS Axes icon.
Figure 11-38. X and Y PPS Axes Icon
2. Press and hold the MEB and Move buttons on the remote positioning hardware
console until the device reaches the target position.
Moving the PPS Along the Y Axis
Proceed as follows:
1. To move the PPS in the + direction along the Y axis, click on the +Y on top of the
X and Y PPS Axes icon.
Alternatively, to move the PPS in the - direction along the Y axis, click on the -Y
below the X and Y PPS Axes icon.