Users Manual Part 2

Clinical User’s Guide IBA | 11-25|
Volume 1 - Treatment Session
|Part II - Using Treatment Room Equipment Using the Remote Positioning Controls |
Alternatively, to cancel the modifications done to the values of the new user
preset click the Revert button at the bottom left of the U
SER PRESET EDITION
MENU.
Note: When the value input in a field is not valid (e.g., gantry angle 500°), a red
cross is displayed next to the field in question. Hover over the red cross and a tooltip
explaining the reason of the error appears. It is not possible to save the user position
if one or more fields are in error.
Editing a User Preset
In order to edit an existing user preset, proceed as follows:
1. Select the user preset that you want to modify from the drop down menu at the
bottom of the ‘User Presets’ part of the Remote Positioning Controls panel.
Figure 11-21. List of User Presets
Remote Positioning Controls Panel - User Presets (typical)
2. In order to access the USER PRESET EDITION MENU, click the Edit User Preset
icon in the ‘User Presets’ part of the Remote Positioning Controls panel.
Figure 11-22. Edit User Preset Icon
Remote Positioning Controls Panel - User Presets (typical)