Users Manual Part 2

Clinical User’s Guide IBA | 11-21|
Volume 1 - Treatment Session
|Part II - Using Treatment Room Equipment Using the Remote Positioning Controls |
2. Press and hold the MEB and Move buttons on the remote positioning hardware
console until the device reaches the target position.
3. Repeat Step 1 and Step 2 for all the required devices until all of the equipment
is ready for CBCT acquisition. All of the icons need to be overlaid by a green
check mark before you are able to proceed to CBCT acquisition.
Table 11-3. CBCT Preparation - Devices Movement Options
Icon Meaning
Retract the snout.
Move accessory drawer into the beam path.
PPS move to Safe position.
Put the orthogonal imager in position for
image acquisition (only available in Gantry
Treatment Rooms).