Users Manual Part 1

Clinical User’s Guide IBA | 1-11|
Volume 1 - Treatment Session
Introduction |
Reading Sequence of This Manual
Your choice of treatment workflow option also decides on the chapters to read in this
manual. This manual contains generic information that is not related to any specific
workflow option on the one hand, and some chapters that are workflow option
specific on the other. This implies that, depending on the workflow option that you
wish to use, those chapters on workflow options that you do wish not to use, are not
relevant to you.
Table 1-3 lists the reading sequence of the chapters, by workflow option.
Note: Generic information has been highlighted in yellow.
Option A: Using the Batch Importer and Standalone
Delivery
This workflow option can be used for the SS, DS, US, and PBS treatment modes.
The treatment plan is created using the Treatment Planning System (TPS) and then
imported into the PTS using the Batch Importer.
Baselining is performed using adaPTprescribe.
All subsequent activities, i.e., patient and plan selection, selection of the beam,
preparation and treatment of the patient, creation of the irradiation record, and local
storage of that record in the PTS software database are performed using
adaPTdeliver.
Table 1-3. Reading Sequence by Workflow Option
Workflow
option A
Workflow
option B
Workflow
option C
1 through 22
23 N/A
24-32
33-39 N/A
N/A 40-41
42 through 50
App A through H
Index
Safety Decisions
Issue Tracking System