Users Manual Part 1

IBA | lxx |
Clinical User’s Guide
Volume 1 - Treatment Session
Chapter 39 An explanation on resuming after a partial irradiation.
Part VII - Using adaPTdeliver in Worklist Mode
Chapter 40 An introduction on what it means to use adaPTdeliver in OIS (DEVC mode).
Chapter 41 An explanation on resuming after a partial irradiation.
Part VIII - Browsing adaPTdeliver Reports
Chapter 42 An explanation on how to use the reporting function in adaPTdeliver.
Part IX - adaPTdeliver in Physics Mode
Chapter 43 A description of the difference in usage of adaPTdeliver in Physics mode, as
compared with its usage in Clinical mode.
Part X - Preparing for Treatment
Chapter 44 A summary of beam scheduling principles.
Chapter 45 A description of some procedures on how to prepare the treatment room.
Part XI - Patient Positioning and Alignment
Chapter 46 An introduction of what patient positioning entails and a description of the
different positions involved.
Chapter 47 An outline of the procedure to calculate alignment corrections using the
adaPTinsight Patient Position Verification System (PPVS) application.
Chapter 48 A description of how to use the Universal Beam Triggering Interface (UBTI)
when taking X-ray images or during treatment.
Chapter 49 A detailed description of the alignment procedure in the GTR.
Part XII - Monitoring an Irradiation
Chapter 50 Here you find out how you can monitor an irradiation.
This chapter ... Describes ...
This appendix ... Describes ...
Appendix A The nozzle components.
Appendix B How to use the Dosimetry Manager.
Appendix C Information on how to configure and manage PTS roles.
Appendix D How to manage adaPTprescribe settings (tolerance tables, MU clinical
ranges, and accessories).
Appendix E An overview of the emergency stop button locations.
Appendix F A list of the different system, error and fault messages intended for the
clinical operator