Users Manual Part 1

IBA | xxxiv | Clinical User’s Guide
Volume 1 - Treatment Session
Selecting and Moving a Device ................................... 9-17
Creating User-Defined Positions ..................................... 9-18
Managing Prescribed and User-Defined Positions .......... 9-21
Using the GUI in Manual Mode ........................................... 9-23
Using Manual Mode to Move the Gantry, the
Accessory Drawer and the Snout .................................... 9-24
Moving the Gantry ...................................................... 9-25
Moving the Accessory Drawer .................................... 9-26
Moving the Snout holder ............................................. 9-26
Using Manual Mode to Move the PPS (Patient
Positioning System) ......................................................... 9-27
Moving the PPS along the X Axis ................................ 9-28
Moving the PPS along the Y Axis ................................ 9-29
Moving the PPS along the Z Axis ................................ 9-29
Rotating the PPS Around the Isocenter ...................... 9-29
Pitching the PPS .......................................................... 9-29
Rolling the PPS ............................................................ 9-31
Moving the Digital Imaging Devices .................................... 9-31
Preparing Equipment for a CBCT Acquisition .................. 9-32
Using Advanced Options From the Menu ........................... 9-39
Recovering Devices after an Error ....................................... 9-40
Colorblind Users: Negative Colors ....................................... 9-40
Chapter 10
Wireless Hand-Pendant Daily Checks and
Troubleshooting
Checking the Good State of the Hand-Pendant’s Casing .... 10-1
Checking the Motion Enable Buttons .................................. 10-2
Checking Sound and Vibration Feedbacks ........................... 10-2
Monitoring Wireless Hand-Pendant Connections ................ 10-3
Solving Battery and Autonomy Issues ................................. 10-3
Chapter 11
Using the Remote Positioning Controls
Safety Measures Specific to the Use of the
Remote Positioning Controls ............................................... 11-2
Performing a Motion Dry Run ......................................... 11-3
Remote Positioning Hardware Console ............................... 11-3
Controlling Speed ................................................................ 11-4
Stopping Movements .......................................................... 11-6
Release the MOVE Button .............................................. 11-6
Release the Motion Enable Button ................................. 11-6