Users Manual Part 1
Clinical User’s Guide
IBA | 11-9|
Volume 1 - Treatment Session
|Part II
- Using Treatment Room Equipment Using the Remote Positioning Controls
|
Figure 11-5. Remote Positioning Controls Panel - Auto Mode
(typical)
Auto Mode Target Positions
A target position may be one of the following:
User preset: a user preset is a target position defined by the user. The label of
a user preset is the name of the preset as defined by the user.
Setup position: setup positions are defined in the Treatment Plan and
associated to setup beams. As such, a setup position is only available as a target
position when a setup beam is selected and the preparation for the setup beam
has started.
Treatment position: treatment positions are associated to treatment beams.
As such, a treatment position is only available as a target position when a
treatment beam is selected and the preparation for the treatment beam has
started.
Target positions
commands
Imaging system
commands
User presets menu