Users Manual Part 1

Clinical User’s Guide IBA | 11-1 |
Volume 1 - Treatment Session
Chapter 11
Using the Remote Positioning
• • • • • •
Controls
Note: Figures of the remote positioning controls panel across this manual show a
typical configuration (Gantry Treatment Room with snout and accessory drawer as
well as with stereoscopic, portal and orthogonal imagery system). Some details may
differ from the remote positioning controls displayed in other room configurations.
However, the principles explained apply to all remote positioning controls panel
configurations.
Most motion control functions can also be used from the Treatment Control Room
(TCR) using the remote positioning controls, which are displayed on adaPTdeliver
screens. The remote positioning controls are used in combination with the remote
positioning hardware console. To execute the motions selected using the remote
positioning controls, you must use the Motion Enable Button (MEB) and Move
buttons on the remote positioning hardware console.
This chapter provides instructions on how to use the remote positioning controls,
covering the following topics:
 Safety Measures Specific to the Use of the Remote Positioning Controls
 Remote Positioning Hardware Console
 Controlling Speed
 Stopping Movements
 Operating Modes: Auto and Manual
 Using the Remote Positioning Controls in Auto Mode
 Using the Remote Positioning Controls in Manual Mode
 Using Advanced Settings