Users Manual Part 1

IBA | 9-36 |
Clinical User’s Guide
Volume 1 - Treatment Session
|Part II
- Using Treatment Room Equipment Using the Wireless Hand-Pendant
|
Figure 9-28. PPS - CBCT Preparation Screen
(typical)
3. Use the Move button on the PPS - CBCT PREPARATION SCREEN to put the PPS in
a safe position for CBCT acquisition.
a. Touch and hold the Move button.
b. While holding the Move button, press and hold the MEB buttons on the
wireless hand-pendant until the device reaches the target position.
A green check mark overlays the Move button once the device has reached the
target position and the workflow progresses automatically onto the next screen.
The D
IGITAL IMAGING DEVICES - CBCT PREPARATION SCREEN appears.
The device icon in the Device Selection bar at the bottom of the screen is also
overlaid by a green check mark once all required movements are complete.