Users Manual Part 1

IBA | 9-34 |
Clinical User’s Guide
Volume 1 - Treatment Session
|Part II
- Using Treatment Room Equipment Using the Wireless Hand-Pendant
|
Figure 9-25. Snout and Accessory Drawer - CBCT Preparation Screen
(typical)
2. Use the Move buttons on the SNOUT AND ACCESSORY DRAWER - CBCT
P
REPARATION SCREEN to retract the snout and put the accessory drawer in the
beam path.
To retract the snout, proceed as follows:
a. Touch and hold the Retract Snout button.
Figure 9-26. Retract Snout Icon
b. While holding the Retract Snout button, press and hold the MEB buttons
on the wireless hand-pendant until the device reaches the target position.