Users Manual Part 1

Clinical User’s Guide IBA | 9-33|
Volume 1 - Treatment Session
|Part II - Using Treatment Room Equipment Using the Wireless Hand-Pendant |
Figure 9-24. CBCT Preparation Button
(typical)
1. To access the CBCT Preparation workflow, touch the CBCT Preparation button.
The CBCT Preparation workflow consists of several screens which enable you
to move the patient positioning and imaging devices to the position required for
adaPTinsight to be able to perform a CBCT scan.
Note: Only the devices available in the treatment room are shown on the
screens of the CBCT Preparation workflow.
Note: The CBCT Preparation workflow has a predetermined order and the
screens progress automatically after each step is complete. However, you may
choose to modify the order of the steps of the CBCT preparation workflow by
selecting the device that you want to prepare next, using the Device Selection
bar at the bottom of the screen. In this case, the screens in the workflow do not
progress automatically.
After touching the CBCT Preparation button, the S
NOUT AND ACCESSORY
DRAWER - CBCT PREPARATION SCREEN appears.
CBCT
Preparation
button