Users Manual Part 1

Clinical User’s Guide IBA | 9-25|
Volume 1 - Treatment Session
|Part II - Using Treatment Room Equipment Using the Wireless Hand-Pendant |
Figure 9-14. Gantry, Snout and Accessory Holder - Manual Mode
(typical)
Moving the Gantry
The Gantry, Accessory Drawer and Snout commands enable you to move the gantry
in several ways.
To move the gantry to a particular angle, proceed as follows:
1. Touch the field on the top right of the screen and enter a target gantry angle.
2. Touch and hold the central Move button.
3. While holding the central Move button, press and hold the MEB buttons on the
wireless hand-pendant until the device reaches the target position.
To move the gantry clockwise or counterclockwise, proceed as follows:
1. Touch and hold the ROT tab on the ROT slider and slide it clockwise or
counterclockwise, as necessary.