Users Manual Part 1

IBA | 9-24 | Clinical User’s Guide
Volume 1 - Treatment Session
|Part II - Using Treatment Room Equipment Using the Wireless Hand-Pendant |
Using Manual Mode to Move the Gantry, the Accessory
Drawer and the Snout
1. Touch the Gantry, Accessory Drawer and Snout icon on the device selection
bar at the bottom of the screen.
Once the gantry, snout and accessory holder subsystem is selected, the interface
displays four Move buttons in the central dial:
 The top and bottom buttons enable you to insert and retract the snout (Insert
Snout button and Retract Snout button).
 The left and right buttons enable you to put the accessory drawer in or out of the
beam path (Move Accessory Drawer Into the Beam Path button and Move
Accessory Drawer Out of the Beam Path button).
 The ROT slider controls gantry rotation, which may be performed either
clockwise or counter clockwise.
A target gantry position may be specified using the field above the central dial,
on the right of the screen.
Note: The GUI is designed to provide quick access to often used actions. Other
actions are accessible using the Nav icon (top left of the screen).