Users Manual Part 1

IBA | 9-12 |
Clinical User’s Guide
Volume 1 - Treatment Session
|Part II
- Using Treatment Room Equipment Using the Wireless Hand-Pendant
|
Operating Modes: Auto and Manual
The wireless hand-pendant can be used in two different operation modes:
Auto mode: using Auto mode, you may perform Auto motions to prescribed or
user-defined target positions.
For detailed information on Auto motions, refer to Chapter 6.
Note: Only those target positions for which conditions are currently met are
available using Auto mode.
Manual mode: using Manual mode, you may perform Manual motions to
positions that are not predefined.
For detailed information on Manual motions, refer to Chapter 6.
Both Auto and Manual modes give you access to the motion of the imaging devices.
Note: The digital imaging devices screen is identical in Auto and Manual mode.
The Auto and Manual operating modes may also be available in the remote
positioning controls (Manual mode available upon request). For more details on how
to use the remote positioning controls, refer to Chapter 11.
Prerequisite: Selecting a Device
Before selecting an operating mode, select your device from the device selection bar
at the bottom of the W
IRELESS HAND-PENDANT GUI SCREEN (see Figure 8-2).
Figure 9-6. Device Selection Bar
A selected device appears in blue on the screen. For example, in Figure 9-6 the
gantry, snout, and drawer are selected.
Imaging
device
Gantry, snout,
and drawer
PPS (or
Positioner)