Users Manual Part 1
IBA | 7-10 |
Clinical User’s Guide
Volume 1 - Treatment Session
|Part II
- Using Treatment Room Equipment Moving the Patient Positioning Devices
|
Figure 7-4. Tool for moving the kVue couch beams
Enhanced Safety Through Various Software Limits
Safe operation of the PPS is guaranteed by a set of configurable software limits and
low level non-configurable software limits for each axis, protecting the patient from
being injured and the equipment from being damaged. To be sufficiently accurate,
these software limits depend on the load that is exerted on the PPS; these limits
reside in the TCS configuration database.
The operation of the software limits is fully transparent to you as a user.
GoTo Motions in a GTR
Commands sent from the hand-pendant to move the Patient Positioning System
(PPS) and gantry and PBS Dedicated snout to a target position are received and
managed by the Therapy Control System (TCS).
Note: Only those Labeled positions for which the conditions are currently met
appear in the GOTO menu.
Press the
handle to move
the beam