Users Manual Part 1

Clinical User’s Guide IBA | 6-9|
Volume 1 - Treatment Session
|Part II - Using Treatment Room Equipment Elementary Notions on Patient Positioning |
Figure 6-6. Wireless Hand-Pendant GUI Screen - Auto and Manual Modes
(typical)
Besides Auto and Manual motions, Trajectory motions are predefined gantry
trajectories that enable the acquisition of CBCT.
Using Auto Motions
Auto motions are available using the Auto operating mode of the hand-pendant or
of the remote positioning controls. This type of motion is used to move several PPDs
to a predefined programmed position (also called target position), which may either
be a prescribed position or a user-defined position.
 Prescribed positions are patient-specific (i.e., they depend on the patient-
specific data from the treatment plan that may be loaded in the system at a
given time).
Manual/Auto mode
selection bar.
Auto motions are
available using the Auto
operating mode of the
hand-pendant.
Manual motions are
available using the
Manual operating mode
of the hand-pendant.