Quick Start Guide

Front Panel

1. Bluetooth LED: This LED will be lit solid when a Bluetooth device is connected.

2. Alarm LED: This LED will be lit solid when an alarm is enabled.

3. Display: Shows the current time, alarm time, or temperature.

4. PM LED: This LED will be lit to indicate PM time.

5. Microphone: This microphone will pick up your voice when receiving calls on a connected

device.

Rear Panel

1. Power Input: Use the included power adapter to connect this input to a power outlet.

2. Aux Input: This stereo 1/8” (3.5 mm) input can be used to connect a CD player, MP3

player, or other audio source.

Note: Only one audio source (Bluetooth, Aux or USB) can play at a time.

3. Temperature Gauge: This gauge will take the current temperature to show on the display.

4. USB Port: Connect a USB flash drive to this port to play back MP3 or WAV audio files.

Use the Play/Pause and Minus/Plus (-/+) buttons to control playback and volume.

5. USB Charge Port: Connect a device's charge cable here to charge it. You can

simultaneously charge one device using the wireless Qi pad and one device using the

wired charge port.

Note: Playing music may reduce the rate of charging per device.