Draft 02. Do not distribute.
Quickstart Guide (English) Introduction Thank you for purchasing the Charge Time. At ION, your entertainment is as important to us as it is to you. That’s why we design our products with one thing in mind—to make your life more fun and more convenient. Box Contents Charge Time Power Adapter Micro-USB Cable 1/8" (3.
Features Top Panel 2 1 3 4 5 6 7 8 9 10 1. Qi Charging Pad: Place your Qi-compatible device here to wirelessly charge it. See Operation > Using the Qi Charging Pad for more information. 2. Phone Cradle: Use this slot to rest a phone upright. Note: Resting tablets in the cradle is not recommended. 3. Alarm Button: Press and hold this button for 2 seconds to adjust the alarm time. See Operation > Using the Alarm for more information. 4.
Front Panel 1 5 3 2 4 1. Bluetooth LED: This LED will be lit solid when a Bluetooth device is connected. 2. Alarm LED: This LED will be lit solid when an alarm is enabled. 3. Display: Shows the current time, alarm time, or temperature. 4. PM LED: This LED will be lit to indicate PM time. 5. Microphone: This microphone will pick up your voice when receiving calls on a connected device. Rear Panel 3 1 2 4 5 1.
Operation Using the Qi Charging Pad To wirelessly charge your Qi-compatible device, place it on Charge Time in the Qi charging area. When a successful charging connection is made, the Qi LED will be lit green and remain solid to indicate the device is charging. If the charging area cannot establish a charging connection with a device, the Qi LED will flash green and red to alert you.
Adjusting the Display Brightness Press the Plus and Minus buttons at the same time to cycle through the brightness settings for the display: low, medium and high. Clock Format Press and hold the Up button for 2 seconds to change the clock format setting. Tap Up to toggle between 12 Hour and 24 Hour clock format and press and hold it to confirm the setting. Temperature Press the Alarm and Clock buttons at the same time to toggle between Celsius and Fahrenheit temperatures.
Appendix (English) Technical Specifications Output Power 20W (2 x 10W peak) Bluetooth Specifications Version: 4.2 Range: Up to 50 feet / 15.25 meters Supported Files Types for MP3, WAV USB Playback USB Charging Port +5 V, 1 A Qi Charging Rate 10W Power Adapter 9V, 2.5A Dimensions 7.3” x 5.7” x 2.8” 185 x 145 x 70 mm (width x depth x height) Weight 1.55 lb. 0.70 kg Specifications are subject to change without notice.
13
ionaudio.com Manual Version 1.
