Solar Stone Quickstart Guide English ( 3 – 5 ) Appendix English ( 6 )
Quickstart Guide (English) Introduction Thank you for purchasing the ION Audio Solar Stone! Solar Stone simulates a natural rock finish that blends into your landscaping, with a solar rechargeable battery-powered, water-resistant speaker. Equipped with Bluetooth technology, you can listen to your favorite music wirelessly while working in the garden, hosting a dinner party, or relaxing by the pool. 1. Make sure all items listed in the Box Contents are included in the box. 2.
Features Back Panel 1. Power – Hold this button to power Solar Stone on and off. 2. Bluetooth Connect – Press this button to begin Bluetooth connecting. Note: Solar Stone will automatically power off after 30 minutes if no audio is playing. 6 1 7 8 LINK 2 4 5 3 3. Link – Press this button to link two Solar Stone units together. 4. Charging Adapter Input – Insert the included charging adapter here to charge the Solar Stone battery.
Linking two Solar Stones to each other for stereo sound: Note: Ensure that the speakers are not already Bluetooth connected in single mode. If either of them is connected, hold the Bluetooth Connect button to disconnect and then follow the steps below. 1. Power on each Solar Stone by holding down their power buttons. You will hear “Power On” for confirmation. * 2. Press the Link button on each Solar Stone. The speakers will search for each other while playing an intermittent tone.
Appendix (English) Technical Specifications Power Via power adapter or solar panel Power adapter: 15 V DC, 2000 mA, center-positive Solar panel: 1 W output Battery Built-in rechargeable 12 V lead-acid battery Battery Life Up to 50 hours * Recharge Time 5.5 hours with AC adapter Speaker Output 20 W (peak) Driver 6.5 in. Water-resistant Class IPX Level 4 Supported Bluetooth Profile A2DP Bluetooth Range Up to 100 ft. / 30.5 m ** Linked Stereo Range Up to 30 ft.
ionaudio.com Compliance Version 1.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
