User guide

Hardware Management
151
Rear Panel
1. USB 2.0 connectors — Supports devices such as USB storage devices and printers.
2. VGA output connector — Connect a monitor for video surveillance applications.
3. Gigabit Ethernet Ports — High-speed Ethernet connectors that will automatically detect your
network speed (10/100/1000Base-T).
4. Reset Button — Press the Reset button to reset security and network settings. This allows you to
regain access if network settings are incorrect or you’ve forgotten your password. Note: The Reset
button does not initiate a full factory reset. To perform a full factory reset, select Factory Reset
from the System page in the Iomega StorCenter px2-300d Console.
5. Power Connector — Plug the power cable into this connector. Input: 19 Vdc, 3.42 A
6. Security Lock — Connect security cable to protect your StorCenter px2-300d from theft.
Default Settings:
 IP Address — If not DHCP server is found on your network, the StorCenter px2-300d will get a
self-assigned IP address in the 169.254.x.x range.
 Device Name — The default name for your Iomega StorCenter px2-300d is px2-300d-XXXXXX
(where XXXXXX is a unique string of letters and numbers).
.