manual

IOMEGA STORAGE PROVISIONING AND RAID MIGRATION CONFIGURATION GUIDE
8
White Paper
3. Choose a RAID level for the Protection type. On the Iomega px12-350r, the following data protection types are
available in the Protection selection box.
Figure 8 Choose data protection type
t Double Parity (RAID 6) – the pool must contain at least 4 drives.
t Parity (RAID 5) – the pool must contain at least 3 drives.
t Mirror (RAID 10) – the pool must contain at least 2 drives.
t None (RAID 0) – the pool must contain at least 2 drives.
t None – the pool can contain one or more drives, and the drives are in a JBOD mode without data protection.
Note: the Protection dropdown box does not list RAID 1 explicitly. However, when only two drives are selected and
the RAID 10 option is chosen, the Storage Pool is effectively built into the RAID 1 mode.