Operation Manual

Media Management
Sharing Media Content over the Internet
There are two methods for sharing media content on your Iomega device with anyone on the
internet. You can enable internet access on the Media Server page. Alternatively, if you have, or
plan to create an Iomega Personal Cloud on your Iomega device , you can enable internet access by
configuring your Iomega Personal Cloud .
Enabling Internet Access from the Media Server Page
1. On the Media Server page, click Settings.
2. In the dialog box, check Enable internet access.
3. Click Apply to save your changes.
4. In the confirmation dialog box, check Check this box to continue.
5. Click OK to save your selection or click Cancel.
To access media content, internet users enter a non-secure IP address in their browser along with
the port number 50599 used to access the media server, for example, http://72.xx.xxx.104:50599,
where "x" is the IP value for your network. When a user enters this IP address, the Twonky Server
page on the Iomega device displays. Refer to the Support section of the Twonky Server page for
information on using the server. Iomega Link users can access media content directly from the
Iomega device . Refer to your Iomega Link documentation for details.
For additional information on enabling internet access, refer to Media Services Capabilities and
Limitations.
How do I...
scan for media content
enable media aggregation
stream music, movies, and pictures
87