Operation Manual

Sharing Files

Bluetooth File Sharing

Once a Bluetooth adapter is detected, files can be uploaded to a configurable destination Share on

the Iomega EZ from a Bluetooth device.

Configuring Bluetooth settings

1. To enable Bluetooth, click the switch on.

2. Once Bluetooth Transfer is enabled, check the Enable security checkbox to require Bluetooth

users to supply a unique PIN that they have defined before allowing them to transfer files to

the destination Share on the Iomega EZ . If you have

enabled security, you must define a

unique PIN number, which will be supplied by devices attempting to upload data using

Bluetooth.

3. To set the destination Share, click

4. Click Apply to save your settings.

Note: To change any Bluetooth settings, click .