User Guide

Turn your computer ON and gently insert the
1GB "tools" disk into your Jaz drive.
The amber data light on the Jaz drive flashes as the disk spins up and
glows steadily while it acquires. When the amber data light goes
out, the drive is ready to use.
CAUTION Never put anything except Jaz disks into the Jaz drive as
this could damage your drive. Keep your Jaz disks free of debris. M
Disk Eject Button
Disk shown
ejected from drive
Disk shown
fully inserted
1
GB
1
GB
tools
M Ejecting Jaz Disks After you push the disk eject button, the
drive takes a few seconds to spin down and eject the disk. M
Insert the Install diskette for your system into
your computer's floppy drive.
Use Disk 1 if your computer is running Windows 95, Windows 3.1,
or DOS. Use Disk 2 if your computer is running Windows NT.
Install
Windows/
DOS
Start the Setup program as described below
and follow the screen instructions to install
your Jaz Tools software.
Windows
®
95 Users: Open My Computer and double click
on the floppy drive icon to open a window for Install Disk 1.
Double click on the Setup icon to install Tools 95 on your system.
Windows NT Users: Run SetupNT from Install Disk 2 to
install your ToolsNT software package.
Windows 3.1 Users: Start Windows. In the Windows
Program Manager, select the File menu and choose Run. In the
Command Line box, type a:setup if Install Disk 1 is in drive a: (or
b:setup if it is in drive b:), then click OK or press the Enter key.
DOS Users: Run GUEST.EXE from the DOS prompt for Install
Disk 1, then run INSTALL.EXE from the DOSSTUFF directory on
the Jaz "tools" disk. After the software installation is complete, run
RECLAIM.EXE from the DOSSTUFF directory. If you need detailed
instructions, refer to MANUAL.EXE on Install Disk 1.
If you need help, refer to "Troubleshooting" in the Jaz User's
Guide. The electronic manual (MANUAL.EXE) located on Install
Disk 1 also includes problem solving information for software
installations under Windows 95, Windows 3.1, and DOS.
M IMPORTANT! Your 1GB Jaz "tools" disk contains installation
files for your Jaz Tools software. Avoid deleting the installation files
for your system in case you need to reinstall your software. M
Congratulations! When the software
installation is complete, your Jaz drive will be
ready to use.
Use your Jaz drive just like any other drive on your system. Your
Jaz drive will have its own drive letter, and you can store and copy
files to and from the Jaz drive using the same methods you use for
your other drives. For more information about using your new drive
and Jaz Tools software, refer to the Jaz User's Guide.
If you want to use your Jaz drive on a Macintosh as well as
your PC: Refer to the GUESTHLP.TXT file on the Windows/DOS Install
diskette for information on accessing your Jaz drive temporarily on a
Macintosh. For full Jaz support, call 1-800-MY-STUFF to order an
additional Jaz tools disk.
Connect the other end of the data cable to the
SCSI connection on your computer.
CAUTION Unless you are using Jaz Traveller, always make sure you
connect the Jaz drive to a SCSI connector and NOT to a printer port
(which is the same size and shape as a 25 pin SCSI connector). If you
need to connect your Jaz drive to a printer port, refer to the Jaz
Traveller Installation Guide. M
4
I A O
I
SCSI ID
Term
0
PWR
Use the 50HD to 25D cable converter
if you need to connect your Jaz drive to
a 25 pin SCSI connector.
50HD to 25D Cable Converter
Jaz Data Cable Connector
For a different converter or cable, call 1-800-MY-STUFF.
OPTIONAL: You can connect other SCSI drives
to the Jaz drive using another SCSI cable
(usually a high density 50 pin to 50 pin cable).
To Computer or
Previous SCSI Device
To Another
SCSI Device
4
I A O
I
SCSI ID
Term
0
PWR
Check SCSI ID's if you have a SCSI chain.
Each device in the SCSI chain must have a unique SCSI ID. If you
have no other devices, the factory setting of SCSI ID 4 should work.
If you need additional information, refer to "SCSI Guidelines" in
your Jaz User's Guide.
M SCSI Termination Your Jaz drive is set to handle SCSI
termination automatically. Refer to the Jaz User's Guide if you
need additional information. M
Connect the external power supply and turn
on the power switch.
CAUTION Use only an approved Iomega Jaz power supply. Other
power supplies may damage your Jaz drive. M
I0
4
I A O
SCSI ID
Term
I0
PWR
| = ON
Check that the green power light is ON.
(Indicates that the power supply is connected
properly.)
Green Power Light
Amber Data Light
(Flashes when drive is busy)
5
10
11
12
9
8
7
6
EN137004